퀄컴은 아두이노 인수를 합의했다고 발표하며, 퀄컴 칩과 마이크로컨트롤러를 탑재한 아두이노 신제품을 출시했습니다.
발표 하이라이트
-
이번 인수는 Qualcomm의 최첨단 제품과 기술을 Arduino의 방대한 생태계와 커뮤니티와 결합해, 기업, 학생, 창업가, 기술 전문가, 교육자, 그리고 열성 사용자들이 아이디어를 빠르고 손쉽게 현실로 만들 수 있도록 지원합니다.
-
Qualcomm Dragonwing™ 플랫폼으로 구동되는 Arduino의 첫 듀얼-브레인 보드인 새로운 Arduino UNO Q는 고성능 컴퓨팅과 실시간 제어를 연결해 “AI in a blink(눈 깜짝할 사이의 AI)”을 구현합니다.
-
Arduino App Lab은 실시간 OS, Linux, Python 및 AI 플로우 전반에 걸친 Arduino 여정을 하나로 통합한 새로운 통합 개발 환경(IDE)으로, 빌드·테스트·배포 과정을 단순화합니다.

Arduino UNO Q
현재 Arduino UNO Q 가 Pre-Order 를 받고 있으며, 가격은 $44입니다. https://store.arduino.cc/products/uno-q
Arduino UNO Q 스펙:
- Application SoC/MPU – Qualcomm QRB2210
- CPU – Quad-core Cortex-A53 processor at up to 2.0 GHz
- GPU – Adreno 702 GPU at 845 MHz with support for OpenGL ES 3.1, Vulkan 1.1, OpenCL 2.0
- DSP – Hexagon QDSP6 v66
- VPU – 1080p 30 fps encode / 1080p 30fps decode
- ISP – 2x Image Signal Processor (13 MP + 13 MP or 25 MP) @ 30 fps
- Real-time MCU – STMicro STM32U585 Arm Cortex-M33 microcontroller @ 160 MHz with 2048 KB flash, 786 KB RAM
- System Memory and Storage
- ABX00162 SKU – 2GB RAM and 16GB eMMC flash
- ABX00173 SKU – 4GB RAM and 32GB eMMC flash
- Video Output – Via USB-C port or HDMI via USB-C dongle. MIPI DSI on header
- Wireless – Dual-band WiFi 5 and Bluetooth 5.1 via WCBN3536A module
- USB – 1x USB Type-C port for power, programming, and video output
- Expansion
- STM32 – Arduino UNO headers and JMISC connector:
- 47x GPIOs, including 22x on JANALOG/JDIGITAL (Arduino headers) and 25x on JMISC
- 6x PWM shared with GPIOs
- 16x interrupts
- 3x USART, 2x UART, 4x I2C, 3x SPI
- CAN Bus (FDCAN)
- 1x PSSI (Parallel Synchronous Slave Interface)
- 2x SAI
- 6x 14-bit ADC input
- 2x 12-bit DAC
- 2x OPAMP
- Qualcomm – JMISC and JMEDIA connectors with
- Up to 12x GPIO
- Display – MIPI DSI bus
- Audio – Microphone IN / Headphone OUT / Line OUT and Ear OUT
- Camera – Dual MIPI CSI
- Qwiic I2C connector
- I/O operating voltage – +3.3 VDC MCU (+5 VDC tolerant) | +1.8 VDC MPU
- DC Current per I/O pin – 20 mA (JANALOG and JMEDIA)
- STM32 – Arduino UNO headers and JMISC connector:
- Debugging – JCTL MPU Remote Debug connector
- Misc
- STM32 – 2x RGB LEDs, 13×8 RGB LED matrix
- Qualcomm – 2x RGB LEDs, power button
- Power Supply
- 5V DC up to 3A via USB-C port
- 7 to 24V DC via Vin pin
- Dimensions – 68.58 x 53.34 mm (Arduino UNO form factor)
Arduino App Lab
이제 아두이노가 마이크로컨트롤러 기반의 플랫폼에서 확장하였기 때문에, Arduino App Lab 이라는 새로운 IDE 도 공개하였습니다.
MCP 와 MPU 를 둘 다 프로그래밍 할 수 있도록 설계되었으며, 기존의 아두이노 코드 뿐만 아니라 Python 과 AI 코드를 실행할 수 있습니다.

차라리 새로운 이름 붙이지..