많은 변경사항이 있지만, 가장 큰 변화점은 AiMesh를 본격적으로 관리할 수 있는 메뉴가 생겼습니다.
주의사항으로는 아래 업데이트 로그에도 있지만,
업데이트 직후 약 5분에서 1시간 정도 공유기가 느리거나, WebUI 접속이 원활하지 않을 수 있습니다.
업데이트 이후 리부팅 한번 하고 차분히 기다리시면 정상화됩니다.
다운로드 URL : https://sourceforge.net/projects/asuswrt-merlin/files/
업데이트 로그
386.1 (30-Jan-2021)
Switched to the new 386 codebase. 386 introduces
AiMesh 2.0, finalizes the move to OpenSSL 1.1.1
firmware-wide, adds a new speedtest (powered
by Ookla). For more details, please refer
to Asus's own release notes.
- NOTE: For developers, note that firmware code is
once again back on the master branch, with
both mainline and ax being reunified again.
- NOTE: Some users upgrading might have to go through some
database maintenance on first boot, which means the
router might be slower or have a non-responsive webui
for a while.
This can take anywhere from 5 minutes up to an hour,
depending on your model, just give it time to complete
the process.
- NEW: Added support for the RT-AX86U.
- NEW: Added support for the GT-AC2900, with a few restrictions:
- Non-ROG UI is used
- VPN Fusion is not supported
- A few other ROG-specific features are not supported
This is an experiment done in collaboration with Asus.
- NEW: Added support for the RT-AC68U V3.
- NEW: Added stub and stub-v2 compression options to OpenVPN
clients. Not added to server, since compression is
considered deprecated, and will be removed most likely
in OpenVPN 2.6, for security reasons.
- NEW: Added tls-crypt-v2 support to OpenVPN clients.
- NEW: Added option to select an OpenVPN client when
running Oookla Speedtest.
- UPDATED: Merged GPL 386_41700
- UPDATED: Openssl to 1.1.1i.
- UPDATED: Updated to OpenVPN 2.5.0. Note that OpenVPN
2.4.0 or newer is now required by the exported
client config file. You can still manually
configure an older client to connect with your
router.
- UPDATED: dnsmasq to 2.84, resolving CVE-2020-25681,
CVE-2020-25682, CVE-2020-25683, CVE-2020-25687,
CVE-2020-25684, CVE-2020-25685 and
CVE-2020-25686 aka DNSpooq (themiron)
- UPDATED: nano to 5.2.
- UPDATED: curl to 7.72.0.
- UPDATED: zlib to 1.2.11.
- UPDATED: lz4 to 1.9.2.
- UPDATED: e2fsprogs to 1.45.6.
- UPDATED: dropbear to 2020.81.
- UPDATED: miniupnpd to 2.2 (git snapshot from 20201129)
- UPDATED: Switched userspace ipset from 6.32 to 7.6 (to match
with upstream)
- CHANGED: firmware update checks are no longer using the
server address stored in nvram, for security
reasons. Devs who were using that nvram
should instead edit the webs_scripts/* to
use their own URL.
- CHANGED: The old legacy cipher setting in OpenVPN is now only
available when running with static key authentication.
- CHANGED: Tweaks to the OpenVPN webui layout
- CHANGED: OpenVPN clients will now NAT all outbound traffic,
regardless of the source subnet.
- CHANGED: Reworked the display of DNSPrivacy presets
- CHANGED: Added AdGuard (ad blocking) and CIRA Canadian Shield
(non US-based service) to the DNSPrivacy presets.
- CHANGED: At boot time, OpenVPN killswitch will only be
applied for clients set to auto-start with WAN.
- CHANGED: Increased number of available mount points for addon
webpages to 20.
- CHANGED: Multiple routes can now be defined per client on the
OpenVPN client-specific configuration.
- CHANGED: Improved NAT acceleration report for newer models on
the sysinfo page. Now query the hardware for the
current state instead of reporting the nvram values.
- CHANGED: When logging allowed connections is enabled, also log
outbound LAN connections (reverts to the behaviour from
a few years ago)
- FIXED: DHCP could fail to renew its lease with some ISPs when
Trend Micro engine was enabled (workaround provided
by Asus)
- FIXED: OpenVPN client remote IP wasn't updated on client
stop/restart.
- FIXED: Couldn't force generating a new SSL certificate for the
webui.
- REMOVED: Option to disable NCP. The NCP cipher list is
now used both for NCP and non-NCP endpoints.
- REMOVED: fq_codel support for Adaptive QoS. Due to a change
in how Trend Micro configures QoS, it is no longer
possible to intercept these to inject fq_codel.
- REMOVED: Option to select sfq as a queue scheduler for t.QoS
or Bandwidth Limiter, and always use fq_codel.
- REMOVED: Support for the Cloudcheck mobile app.
아시는분만 올리라고 글 안올리긴했는데 ..
베타때 문제 다 고쳐졌으려나 봐야겠네요..
web ui 안돌아와서 초기화했네요 ㅎㅎㅎ;;
기다렸으면 되었던거네요...
왜 2월만 남았는지 모르겠네요..