아이맥 2015 late 27인치입니다.
cpu를 업글하겠다고 다 분해하고 i5-6500 -> i7-6700k로 업글해 보았습니다.
그러고 나서 현상이 파워 버튼을 누르면 화면이 안들어오고 조금 있으면 팬 돌아가는 소리가 납니다.
cpu 문제인가 싶어서 원래 cpu로 돌려놔도 똑같은 현상입니다.
해결 방법을 아시는 분이 있을까요? ㅠㅠ
다음 시도는 수은 전지를 빼놓고 하루 기다려 보려고 합니다만....
아이맥 2015 late 27인치입니다.
cpu를 업글하겠다고 다 분해하고 i5-6500 -> i7-6700k로 업글해 보았습니다.
그러고 나서 현상이 파워 버튼을 누르면 화면이 안들어오고 조금 있으면 팬 돌아가는 소리가 납니다.
cpu 문제인가 싶어서 원래 cpu로 돌려놔도 똑같은 현상입니다.
해결 방법을 아시는 분이 있을까요? ㅠㅠ
다음 시도는 수은 전지를 빼놓고 하루 기다려 보려고 합니다만....
그상태에서 부팅 해보시면 몇번째 까지 불이 들어 오나요?
25단계를 확인 해보시면
3번 불이 안들어 온다면
현재 그래픽 카드쪽 통신에 문제가 생긴것 같습니다.
boxed in orange, are diagnostic LEDs
LED 1 - Indicates that the trickle voltage from the power supply is detected by the main logic board. This LED will remain ON while the iMac is connected to the AC power. The LED will remain on even when the computer has been shut down or put to sleep. The LED will turn off only if the AC power is disconnected or the power supply is faulty.
LED 2 - Indicates that the main logic board has detected proper power from the power supply when the computer is turned on. This LED will be ON when the computer is turned on and the power supply is working correctly.
LED 3 - Indicates that the computer and the video card are communicating. This LED will be ON when the computer is communicating properly with the video card. If LEDs 1 and 2 are ON and you heard the startup sound, but LED 3 is OFF, then the video card might be installed incorrectly or need replacement.
LED 4 - Indicates that the computer and the LCD display panel are communicating. This LED will be ON when the computer is turned on and video signal is being generated. If the LED is ON and there is no image on the LCD display panel, the LCD display panel or inverter might be installed incorrectly or need replacement.